Guide · Homeowners · 3 min read · Updated 17 November 2026
Replacing a Rotten Gate Post: Methods, Materials and Costs
Short answer
A rotten gate post is replaced by removing the gate, digging out the old post and its concrete, setting a new treated softwood, hardwood or steel-reinforced post plumb in fresh concrete or a post support, letting it cure, then rehanging the gate. In the UK this typically costs £180–£350 per post. Shaping the concrete to shed water away from the timber helps the new post last far longer.
Signs a gate post needs replacing
Gate posts rarely fail all at once. The first sign is usually a gate that no longer latches cleanly, followed by a visible lean and a post that moves when you push the gate. Rot almost always starts at or just below ground level, where the timber stays damp, so the top of the post can look perfect while the base is soft.
Push a screwdriver into the post where it meets the ground. If it sinks in easily or the timber crumbles, the post is rotten. Split timber around hinge screws, mushroom-like growths at the base and a hollow sound when tapped are other warning signs.
- Gate no longer latches or scrapes the ground
- Post leans or rocks when the gate is pushed
- Soft or crumbling timber at ground level
- Splits around hinge or latch fixings
- Fungal growth at the base of the post
Choosing a replacement post
The right post depends on the gate's weight and width and how long you want it to last. Pressure-treated softwood rated for ground contact is the most common choice for side gates. Hardwood posts such as oak are stronger and suit heavier gates and period properties. For heavy driveway gates, a timber post with a steel core or a steel post clad in timber gives strength without changing the look.
Hinge posts carry far more load than latch posts, so they should be the heavier section of the pair. A post that is too slim for the gate will flex and let the gate drop, even if it never rots.
| Post option | Best for | Points to note |
|---|---|---|
| Treated softwood, ground-contact rated | Side and garden gates | Cost-effective, treat cut ends |
| Oak or other hardwood | Heavier gates, period homes | Stronger and longer-lived, costs more |
| Steel-reinforced timber | Heavy driveway gates | Timber look with steel strength |
| Post on bolt-down or concrete spur | Keeping timber out of the ground | Neat solution where digging is limited |
How the work is done
The gate is taken off and set aside. The old post is cut down and the stump and its concrete are dug out. This can take longer than people expect if the previous post was set in a large block. The hole is cleaned out and, where needed, enlarged so the new post has enough concrete around it.
The new post is set on a layer of gravel for drainage, braced plumb in both directions and concreted in. The top of the concrete is shaped so it slopes away from the post, which stops water collecting against the timber. The concrete is left to gain strength before the gate is rehung, usually at least overnight and longer for heavy gates.
Making the new post last
The most common reason a replacement post rots quickly is water. Posts set in a cup of concrete that traps rain around the base will rot in the same place as before. A gravel base, a sloped concrete collar finishing just above ground level and treated cut ends all help. Cutting the top of the post at an angle or fitting a post cap stops water soaking into the end grain from above.
Another option is keeping the timber out of the ground altogether. A concrete spur or steel post support holds the timber clear of the soil, so the wood stays drier. These suit lighter gates and fence-line gates well.
Costs and timings
Replacing a single timber gate post typically costs £180–£350 in the UK, including removing the old post and concrete, a new treated post and fresh concrete. Hardwood posts, steel-reinforced posts and posts for heavy driveway gates sit at or above the top of that range. Replacing both posts at once usually works out cheaper per post than doing them separately.
Most single post replacements are completed in a day, with the gate rehung either the same day if a rapid-setting mix is suitable or on a return visit once the concrete has cured. If the gate itself also needs work, combining the jobs saves a second call-out.
Planning and boundaries
Replacing a gate post like for like rarely needs any permission. In England, gates and posts of similar height to the old ones usually need no planning permission, but new gates over 1 metre high next to a road used by vehicles or over 2 metres elsewhere generally do. Listed buildings may need listed building consent even for like-for-like changes.
If the post sits on a boundary you share with a neighbour, it is worth agreeing the work with them first, especially if the fence attaches to the post. When you request quotes through us, local specialists can talk through the options for your gate and boundary.
Questions people also ask
How long should a new gate post last?
A ground-contact treated softwood post set with good drainage can last many years, and hardwood or steel-reinforced posts longer still. Lifespan depends heavily on how wet the ground is and whether the concrete sheds water away from the timber. Posts set in a cup of concrete that traps rain tend to rot much sooner.
Can a rotten gate post be repaired instead of replaced?
Sometimes a post rotted only at the base can be cut off above the rot and bolted to a concrete spur or steel support. This works for lighter gates and fence-line posts. For hinge posts on heavier gates, full replacement is usually more reliable because the post carries the gate's whole weight.
How long before I can rehang a gate on a new post?
With standard concrete, it is best to wait at least overnight before hanging a light gate, and longer for heavy driveway gates. Rapid-setting post mixes can allow a light gate to be hung the same day. Hanging too soon can push the post out of plumb before the concrete has gained strength.
Written and checked by the Wooden Gate Repair team. Read our editorial policy.
More guides
Wooden Gate Repair Cost UK: 2026 Prices for Common Jobs
In the UK in 2026, rehanging and bracing a sagging side gate typically costs £90–£180. Replacing a timber gate post costs £180–£350 per post, new…
How to Fix a Sagging Wooden Gate (and Stop It Dropping Again)
To fix a sagging wooden gate, first find the cause: loose hinge screws, a weak or missing diagonal brace, loose joints or a leaning post. Tighten or…
How to Treat and Refinish a Wooden Gate: Oil, Stain or Paint?
Choose oil for hardwood gates you want to keep looking natural, stain or a coloured preservative for softwood gates, and exterior paint for a solid…
Repair or Replace a Wooden Gate? How to Decide
Repair a wooden gate if the frame is mostly sound and the problem is sagging, loose fittings, a few rotten boards or a rotten post. Replace it if rot…
Get a free wooden gate repair quote
Tell us what you need and we'll come back with a clear price.
Request a quote