Wooden Gate Repair glossary
The terms you'll come across, explained in plain English.
- Anti-sag kit
- A steel cable and turnbuckle fitted diagonally across a gate. Tightening the turnbuckle lifts the latch end, correcting and preventing sagging.
- Concrete spur
- A short concrete post set in the ground, to which a timber post is bolted so the wood stays clear of damp soil.
- Diagonal brace
- A timber running at an angle between rails, from the bottom hinge side up to the top latch side. It holds the gate square and stops the latch end sagging.
- Drop bolt
- A long vertical bolt fixed to a gate that drops into a socket or keep in the ground, holding one leaf of a pair of gates closed.
- End grain
- The exposed ends of timber where the wood fibres are cut across. It absorbs water much faster than the faces, so it needs sealing and protecting.
- Framed gate
- A gate built with a perimeter frame of stiles and rails joined together, with boards or panels set into it. It is stronger and less prone to twisting than a simple ledged gate.
- Ground-contact rated
- Treated timber with a higher level of preservative, suitable for setting into soil or concrete, such as gate and fence posts.
- Hanging post
- The post that carries the gate's hinges and therefore its whole weight. It should be the heavier and more securely set of the two posts.
- Ledged and braced gate
- A gate made from vertical boards fixed to horizontal rails called ledges, with diagonal braces between them to stop the gate dropping. It is the most common style of timber side gate.
- Pressure-treated timber
- Softwood that has had preservative forced into it under pressure in a factory, giving protection against rot and insect attack. Cut ends still need treating.
- Rail
- A horizontal member of a gate. Most gates have a top, middle and bottom rail, with the bottom rail most prone to rot.
- Slamming post
- The post the gate closes against, which carries the latch or keep. It takes impact when the gate is shut but no hanging weight.
- Stile
- One of the vertical side members of a gate frame. The hanging stile carries the hinges and the closing stile carries the latch.
- Strap hinge
- A long, flat hinge that runs along a gate rail, spreading the load over a greater length of timber than a short butt hinge and helping resist sagging.
- Thumb latch
- A traditional gate latch, often called a Suffolk latch, operated by pressing a lever with the thumb to lift a bar on the other side of the gate.
Get a free wooden gate repair quote
Tell us what you need and we'll come back with a clear price.
Request a quote