Wooden Gate Repair

Wooden Gate Repair

Sagging Gate Rehanging

Lifting and squaring dropped gates, fixing loose joints, adding diagonal bracing and refitting hinges so the gate swings clear and latches first time.

Free Wooden Gate Repair quote

No obligation. We only use your details to reply about this job.

Sagging Gate Rehanging — Wooden Gate Repair

What's involved

A sagging gate is usually caused by one of three things: hinge screws pulling out, joints in the frame loosening, or the hanging post leaning. The carpenter checks each in turn with a level and straight edge. Loose mortise and tenon or halving joints are glued, pinned or reinforced with stainless brackets. Most ledged gates need a diagonal brace running from the bottom hinge side up to the top latch side; fitted the wrong way round, it does nothing. Hinges are refixed with longer coach screws or through-bolts into sound timber, or swapped for heavier tee or band hinges. A gate rehang normally takes two to four hours. If the post is the problem, it will be straightened or replaced as a separate job. Please clear plant pots and furniture from both sides beforehand.

How we handle it

  1. Send photos and details

    Use the quote form to tell us what is wrong, the gate's size and timber type, and whether it is a side gate or driveway gate. Photos of the hinges, posts and bottom rail let a specialist judge the repair quickly.

  2. Assessment

    A local carpenter checks the posts for rot and lean, the frame for loose joints and the fittings for wear. They will say plainly whether the gate is worth repairing or should be replaced.

  3. Clear quote

    You receive one price covering labour, timber, fittings and concrete, plus taking away old timber. Most small repairs are priced on the spot from your photos or at a short visit.

  4. Repair work

    Posts are reset first, then the frame is squared, rotten parts replaced and new fittings added. Where posts are set in concrete, the gate is usually rehung the next day once it has firmed up.

  5. Adjust and finish

    The gate is adjusted so it swings clear of the ground and latches cleanly, then new timber is treated. The specialist tidies up, removes waste and explains how to keep the gate in good order.

Price guide

Wooden gate repair is usually priced per job, based on what needs doing and the materials involved. Small fixes such as rehanging a sagging gate or swapping a latch cost much less than replacing a post set in concrete. The guide prices below are typical for UK homes in 2026 and include labour and standard materials.

  • Replace hinges and latch: £80–£160. Supply and fit of galvanised or black hinges and a new latch or lockable bolt.
  • Replace a timber gate post: £180–£350. Per post, including removing the old post and concrete, a new treated post and fresh concrete.
  • Rehang and brace a sagging side gate: £90–£180. Tightening joints, adding a diagonal brace and refixing hinges into sound timber on a standard garden gate.

Questions about sagging gate rehanging

Why is my wooden gate sagging?

Usually because the hinge screws are pulling out, the frame joints have loosened, or the hanging post is leaning or rotten. A missing or wrongly fitted diagonal brace makes it worse. The fix depends on the cause, so check the post first by pushing it; if it moves, the post needs attention before the gate.

Get a free wooden gate repair quote

Tell us what you need and we'll come back with a clear price.

Request a quote