Wooden Gate Repair
Gate Restoration and Refinishing
Cleaning, sanding and re-treating weathered timber gates with preservative, oil, stain or paint to bring the colour back and protect the wood.

What's involved
Grey, cracked or flaking timber is a sign the wood has lost its protection. The specialist washes the gate to remove algae and dirt, lets it dry fully, then sands back loose fibres and old flaking coatings. Bare end grain and any new timber get a preservative first. Softwood gates are then finished with a microporous stain or exterior paint that lets moisture escape. Hardwood such as oak and iroko suits a penetrating oil that feeds the timber without forming a film that peels. Most finishes need two coats with drying time between them, so restoration often runs over two short visits. Dry weather above about 10°C gives the best result. Expect to re-oil hardwood every year or two and re-stain softwood every three to five years.
How we handle it
Send photos and details
Use the quote form to tell us what is wrong, the gate's size and timber type, and whether it is a side gate or driveway gate. Photos of the hinges, posts and bottom rail let a specialist judge the repair quickly.
Assessment
A local carpenter checks the posts for rot and lean, the frame for loose joints and the fittings for wear. They will say plainly whether the gate is worth repairing or should be replaced.
Clear quote
You receive one price covering labour, timber, fittings and concrete, plus taking away old timber. Most small repairs are priced on the spot from your photos or at a short visit.
Repair work
Posts are reset first, then the frame is squared, rotten parts replaced and new fittings added. Where posts are set in concrete, the gate is usually rehung the next day once it has firmed up.
Adjust and finish
The gate is adjusted so it swings clear of the ground and latches cleanly, then new timber is treated. The specialist tidies up, removes waste and explains how to keep the gate in good order.
Price guide
Wooden gate repair is usually priced per job, based on what needs doing and the materials involved. Small fixes such as rehanging a sagging gate or swapping a latch cost much less than replacing a post set in concrete. The guide prices below are typical for UK homes in 2026 and include labour and standard materials.
- Rehang and brace a sagging side gate: £90–£180. Tightening joints, adding a diagonal brace and refixing hinges into sound timber on a standard garden gate.
- Replace a timber gate post: £180–£350. Per post, including removing the old post and concrete, a new treated post and fresh concrete.
- Replace hinges and latch: £80–£160. Supply and fit of galvanised or black hinges and a new latch or lockable bolt.
Questions about gate restoration and refinishing
Why is my wooden gate sagging?
Usually because the hinge screws are pulling out, the frame joints have loosened, or the hanging post is leaning or rotten. A missing or wrongly fitted diagonal brace makes it worse. The fix depends on the cause, so check the post first by pushing it; if it moves, the post needs attention before the gate.
What is the best wood for a garden gate?
For most side gates, pressure-treated softwood is good value and lasts well if maintained. Hardwoods such as iroko and oak are heavier, more stable and longer lasting, making them a good choice for driveway gates and front gates that are seen every day.
Is it worth repairing a wooden gate or should I replace it?
Repair is worth it when the frame is mostly sound and the problem is posts, hinges or a few boards. Replacement makes sense when rot runs through the frame, the gate was badly made or repairs would cost more than half the price of a new one. Hardwood gates are usually worth saving.
Other services
Sagging Gate Rehanging
Lifting and squaring dropped gates, fixing loose joints, adding diagonal bracing and refitting hinges so the gate swings clear and latches first time.
Gate Post Replacement
Removing rotten or leaning timber posts and setting new treated softwood, hardwood or steel-reinforced posts in concrete or post supports.
Rail and Board Repairs
Replacing split boards, rotten bottom rails and broken stiles, matching timber where possible so the repair blends in with the original gate.
Hinge, Latch and Lock Replacement
Fitting new hinges, latches, bolts, drop bolts and gate locks, choosing heavy-duty, galvanised or stainless fittings to suit the gate and exposure.
Made-to-Measure Replacement Gates
When a gate is beyond saving, a new timber gate built or supplied to fit the opening exactly, hung on new posts and fittings.
Gate Restoration and Refinishing near you
Get a free wooden gate repair quote
Tell us what you need and we'll come back with a clear price.
Request a quote