Wooden Gate Repair
Rail and Board Repairs
Replacing split boards, rotten bottom rails and broken stiles, matching timber where possible so the repair blends in with the original gate.

What's involved
The bottom rail and the lower ends of boards take most of the weather, so they rot first. Rather than replacing the whole gate, a carpenter cuts out damaged sections and fits new timber of the same profile, whether that is tongue and groove, featheredge, close board or picket. On framed gates, a rotten stile or rail can be replaced by dismantling the frame, or spliced with a scarf joint glued with exterior-grade adhesive. Matching hardwood such as oak or iroko is ordered to size where needed. New timber will look brighter at first, so the specialist can stain it to tone in. Most board and rail repairs take two to five hours depending on how much needs replacing. Let us know the gate's size, timber type and finish when you request a quote.
How we handle it
Send photos and details
Use the quote form to tell us what is wrong, the gate's size and timber type, and whether it is a side gate or driveway gate. Photos of the hinges, posts and bottom rail let a specialist judge the repair quickly.
Assessment
A local carpenter checks the posts for rot and lean, the frame for loose joints and the fittings for wear. They will say plainly whether the gate is worth repairing or should be replaced.
Clear quote
You receive one price covering labour, timber, fittings and concrete, plus taking away old timber. Most small repairs are priced on the spot from your photos or at a short visit.
Repair work
Posts are reset first, then the frame is squared, rotten parts replaced and new fittings added. Where posts are set in concrete, the gate is usually rehung the next day once it has firmed up.
Adjust and finish
The gate is adjusted so it swings clear of the ground and latches cleanly, then new timber is treated. The specialist tidies up, removes waste and explains how to keep the gate in good order.
Price guide
Wooden gate repair is usually priced per job, based on what needs doing and the materials involved. Small fixes such as rehanging a sagging gate or swapping a latch cost much less than replacing a post set in concrete. The guide prices below are typical for UK homes in 2026 and include labour and standard materials.
- Replace a timber gate post: £180–£350. Per post, including removing the old post and concrete, a new treated post and fresh concrete.
- Rehang and brace a sagging side gate: £90–£180. Tightening joints, adding a diagonal brace and refixing hinges into sound timber on a standard garden gate.
- New made-to-measure softwood side gate fitted: from £350. Treated ledged and braced or framed gate with fittings; hardwood driveway gates cost considerably more.
Questions about rail and board repairs
How much does it cost to repair a wooden gate?
Simple repairs such as rehanging and bracing a sagging gate typically cost £90 to £180. Replacing a rotten gate post costs around £180 to £350 per post. New hinges and latches cost roughly £80 to £160. Refinishing a gate costs £120 to £300 depending on its size.
Why is my wooden gate sagging?
Usually because the hinge screws are pulling out, the frame joints have loosened, or the hanging post is leaning or rotten. A missing or wrongly fitted diagonal brace makes it worse. The fix depends on the cause, so check the post first by pushing it; if it moves, the post needs attention before the gate.
Why won't my gate latch properly?
Usually because the gate has dropped, the post has moved or the timber has swollen in wet weather. Moving the latch keep is a quick fix, but if the gate is sagging the specialist will rehang it so the latch lines up through the seasons.
Other services
Sagging Gate Rehanging
Lifting and squaring dropped gates, fixing loose joints, adding diagonal bracing and refitting hinges so the gate swings clear and latches first time.
Gate Post Replacement
Removing rotten or leaning timber posts and setting new treated softwood, hardwood or steel-reinforced posts in concrete or post supports.
Hinge, Latch and Lock Replacement
Fitting new hinges, latches, bolts, drop bolts and gate locks, choosing heavy-duty, galvanised or stainless fittings to suit the gate and exposure.
Gate Restoration and Refinishing
Cleaning, sanding and re-treating weathered timber gates with preservative, oil, stain or paint to bring the colour back and protect the wood.
Made-to-Measure Replacement Gates
When a gate is beyond saving, a new timber gate built or supplied to fit the opening exactly, hung on new posts and fittings.
Rail and Board Repairs near you
Get a free wooden gate repair quote
Tell us what you need and we'll come back with a clear price.
Request a quote