Wooden Gate Repair
Made-to-Measure Replacement Gates
When a gate is beyond saving, a new timber gate built or supplied to fit the opening exactly, hung on new posts and fittings.

What's involved
Sometimes repair is a false economy, for example when the frame is rotten throughout, the gate was poorly made in the first place, or the opening has changed. In that case the specialist measures the opening at top and bottom, because posts are rarely perfectly parallel, and orders a gate to suit. Options include pressure-treated softwood ledged and braced gates, framed tongue and groove gates, picket gates, and hardwood driveway gates in iroko or oak. The gate is supplied with hinges and latch, hung, adjusted and given a final coat if needed. Ready-made gates can be fitted within days; bespoke hardwood gates typically take three to six weeks to make. The specialist will tell you honestly whether repair or replacement offers better value.
How we handle it
Send photos and details
Use the quote form to tell us what is wrong, the gate's size and timber type, and whether it is a side gate or driveway gate. Photos of the hinges, posts and bottom rail let a specialist judge the repair quickly.
Assessment
A local carpenter checks the posts for rot and lean, the frame for loose joints and the fittings for wear. They will say plainly whether the gate is worth repairing or should be replaced.
Clear quote
You receive one price covering labour, timber, fittings and concrete, plus taking away old timber. Most small repairs are priced on the spot from your photos or at a short visit.
Repair work
Posts are reset first, then the frame is squared, rotten parts replaced and new fittings added. Where posts are set in concrete, the gate is usually rehung the next day once it has firmed up.
Adjust and finish
The gate is adjusted so it swings clear of the ground and latches cleanly, then new timber is treated. The specialist tidies up, removes waste and explains how to keep the gate in good order.
Price guide
Wooden gate repair is usually priced per job, based on what needs doing and the materials involved. Small fixes such as rehanging a sagging gate or swapping a latch cost much less than replacing a post set in concrete. The guide prices below are typical for UK homes in 2026 and include labour and standard materials.
- New made-to-measure softwood side gate fitted: from £350. Treated ledged and braced or framed gate with fittings; hardwood driveway gates cost considerably more.
- Clean, sand and refinish a gate: £120–£300. Two coats of stain, oil or paint; double driveway gates sit at the top of the range.
- Replace rotten bottom rail or boards: £120–£280. Cutting out damaged timber, fitting matching sections and treating new wood on a typical side gate.
Questions about made-to-measure replacement gates
Why won't my gate latch properly?
Usually because the gate has dropped, the post has moved or the timber has swollen in wet weather. Moving the latch keep is a quick fix, but if the gate is sagging the specialist will rehang it so the latch lines up through the seasons.
Which way should the brace go on a wooden gate?
The diagonal brace should run from the bottom corner on the hinge side up to the top corner on the latch side. That way it pushes against the bottom hinge and resists the gate dropping. Fitted the other way, it adds little support and the gate will still sag.
Do I need planning permission to replace a wooden gate?
Not usually, if the new gate is a similar size to the old one. In England, gates over 1 metre next to a road used by vehicles, or over 2 metres elsewhere, generally need permission. Listed buildings and some conservation areas have extra controls.
Other services
Sagging Gate Rehanging
Lifting and squaring dropped gates, fixing loose joints, adding diagonal bracing and refitting hinges so the gate swings clear and latches first time.
Gate Post Replacement
Removing rotten or leaning timber posts and setting new treated softwood, hardwood or steel-reinforced posts in concrete or post supports.
Rail and Board Repairs
Replacing split boards, rotten bottom rails and broken stiles, matching timber where possible so the repair blends in with the original gate.
Hinge, Latch and Lock Replacement
Fitting new hinges, latches, bolts, drop bolts and gate locks, choosing heavy-duty, galvanised or stainless fittings to suit the gate and exposure.
Gate Restoration and Refinishing
Cleaning, sanding and re-treating weathered timber gates with preservative, oil, stain or paint to bring the colour back and protect the wood.
Made-to-Measure Replacement Gates near you
Get a free wooden gate repair quote
Tell us what you need and we'll come back with a clear price.
Request a quote