Staffordshire · West Midlands
Wooden Gate Repair in Burntwood
Gates in Burntwood and nearby Cannock take a battering from wet winters. Our local carpenters replace rotten posts and broken rails so they swing true again.
Send photos of your gate for a quick Burntwood repair price.
Covering Burntwood and nearby
Burntwood is in the Staffordshire council area in the West Midlands. Postcodes we cover here include WS7. Nearby places we also cover include Brownhills, Pelsall, Norton Canes, Cannock Chase and Rawnsley.
What to expect in Burntwood
The West Midlands motorway network makes it one of the easiest areas in the country to reach quickly, which helps with short-notice work. Newer homes in Burntwood sometimes have gates fixed to the house wall, where specialists use proper wall anchors to stop the hinge side pulling away.
Many semi-detached and detached homes in Burntwood have tall boarded side gates that sag after a few years, usually because the post has moved. Where Burntwood gardens are well planted, specialists take care to protect borders when digging out old posts and concrete.
Wooden Gate Repair services in Burntwood
Gate Post Replacement
Removing rotten or leaning timber posts and setting new treated softwood, hardwood or steel-reinforced posts in concrete or post supports.
Sagging Gate Rehanging
Lifting and squaring dropped gates, fixing loose joints, adding diagonal bracing and refitting hinges so the gate swings clear and latches first time.
Made-to-Measure Replacement Gates
When a gate is beyond saving, a new timber gate built or supplied to fit the opening exactly, hung on new posts and fittings.
Gate Restoration and Refinishing
Cleaning, sanding and re-treating weathered timber gates with preservative, oil, stain or paint to bring the colour back and protect the wood.
Hinge, Latch and Lock Replacement
Fitting new hinges, latches, bolts, drop bolts and gate locks, choosing heavy-duty, galvanised or stainless fittings to suit the gate and exposure.
Rail and Board Repairs
Replacing split boards, rotten bottom rails and broken stiles, matching timber where possible so the repair blends in with the original gate.
Wooden Gate Repair prices in Burntwood
- New made-to-measure softwood side gate fitted: from £350. Treated ledged and braced or framed gate with fittings; hardwood driveway gates cost considerably more.
- Clean, sand and refinish a gate: £120–£300. Two coats of stain, oil or paint; double driveway gates sit at the top of the range.
- Replace rotten bottom rail or boards: £120–£280. Cutting out damaged timber, fitting matching sections and treating new wood on a typical side gate.
Prices are a guide. Your quote for Burntwood is a fixed price based on the details you give us. Full price guide.
Wooden Gate Repair questions from Burntwood
Can someone fix my sagging gate in Burntwood this week?
Often, yes. Carpenters covering Burntwood and Cannock handle many small gate repairs at short notice, as they rarely need specially ordered parts. Post replacements may need an extra day for concrete to set.
Do I need permission to replace a gate in Burntwood?
Usually not for a like-for-like replacement. Taller gates, listed buildings and some conservation areas may need consent from Staffordshire, so check before making major changes.
Can you repair a shared side gate in Burntwood?
Yes. Shared gates between Burntwood homes are repaired the same way, but it is best to agree the work and cost with your neighbour before booking, as both households usually share responsibility.
Do you replace rotten gate posts in Burntwood?
Yes. Specialists across Staffordshire dig out rotten posts and old concrete, set new treated or hardwood posts in fresh concrete, then rehang the gate once it has firmed up.
Which way should the brace go on a wooden gate?
The diagonal brace should run from the bottom corner on the hinge side up to the top corner on the latch side. That way it pushes against the bottom hinge and resists the gate dropping. Fitted the other way, it adds little support and the gate will still sag.
How do I stop a gate post from rotting?
Use posts rated for ground contact, set them in concrete shaped to slope away from the timber, and keep soil and mulch clear of the base. Metal post supports or concrete spurs keep timber off the ground entirely. Re-treating the exposed timber every few years also helps.
Helpful guides
How to Treat and Refinish a Wooden Gate: Oil, Stain or Paint?
Choose oil for hardwood gates you want to keep looking natural, stain or a coloured preservative for softwood gates, and exterior paint for…
Read the guide →How to Fix a Sagging Wooden Gate (and Stop It Dropping Again)
To fix a sagging wooden gate, first find the cause: loose hinge screws, a weak or missing diagonal brace, loose joints or a leaning post.…
Read the guide →Get a free wooden gate repair quote in Burntwood
Tell us what you need and we'll come back with a clear price.
Request a quote