Walsall · West Midlands
Wooden Gate Repair in Walsall
Gates in Walsall and nearby Wednesbury take a battering from wet winters. Our local carpenters replace rotten posts and broken rails so they swing true again.
Walsall and the surrounding area
We cover all of Walsall and the wider Walsall area. Jobs here are mostly in the WS2, WS1, WS5, WS4, WS9 and B43 postcode areas. The same team covers Pelsall, Shelfield and Pheasey too.
Working in Walsall
Double timber drive gates on Walsall homes need regular adjustment, and a drop bolt and ground keep help stop the pair twisting. Suburban front gardens in Walsall often have low picket or ledged gates that just need new hinges, a brace and a fresh coat of stain.
The West Midlands motorway network makes it one of the easiest areas in the country to reach quickly, which helps with short-notice work. Victorian and Edwardian homes in Walsall often have hardwood gates with mortise and tenon frames that are well worth repairing rather than replacing.
Our services in Walsall
Hinge, Latch and Lock Replacement
Fitting new hinges, latches, bolts, drop bolts and gate locks, choosing heavy-duty, galvanised or stainless fittings to suit the gate and exposure.
Rail and Board Repairs
Replacing split boards, rotten bottom rails and broken stiles, matching timber where possible so the repair blends in with the original gate.
Gate Post Replacement
Removing rotten or leaning timber posts and setting new treated softwood, hardwood or steel-reinforced posts in concrete or post supports.
Sagging Gate Rehanging
Lifting and squaring dropped gates, fixing loose joints, adding diagonal bracing and refitting hinges so the gate swings clear and latches first time.
Made-to-Measure Replacement Gates
When a gate is beyond saving, a new timber gate built or supplied to fit the opening exactly, hung on new posts and fittings.
Gate Restoration and Refinishing
Cleaning, sanding and re-treating weathered timber gates with preservative, oil, stain or paint to bring the colour back and protect the wood.
Guide prices for Walsall
- New made-to-measure softwood side gate fitted: from £350. Treated ledged and braced or framed gate with fittings; hardwood driveway gates cost considerably more.
- Clean, sand and refinish a gate: £120–£300. Two coats of stain, oil or paint; double driveway gates sit at the top of the range.
- Replace rotten bottom rail or boards: £120–£280. Cutting out damaged timber, fitting matching sections and treating new wood on a typical side gate.
Prices are a guide. Your quote for Walsall is a fixed price based on the details you give us. Full price guide.
Wooden Gate Repair questions from Walsall
What timber do you use for gate repairs in Walsall?
Carpenters in Walsall usually use pressure-treated softwood rated for ground contact for posts and rails, and match hardwood such as oak or iroko when repairing hardwood gates.
How much does wooden gate repair cost in Walsall?
Most gate repairs in Walsall cost between £90 and £350, depending on whether the job is a simple rehang, new fittings or a replacement post. A local carpenter can usually price the work from your photos.
Can someone fix my sagging gate in Walsall this week?
Often, yes. Carpenters covering Walsall and Wednesbury handle many small gate repairs at short notice, as they rarely need specially ordered parts. Post replacements may need an extra day for concrete to set.
Do you replace rotten gate posts in Walsall?
Yes. Specialists across Walsall dig out rotten posts and old concrete, set new treated or hardwood posts in fresh concrete, then rehang the gate once it has firmed up.
Which way should the brace go on a wooden gate?
The diagonal brace should run from the bottom corner on the hinge side up to the top corner on the latch side. That way it pushes against the bottom hinge and resists the gate dropping. Fitted the other way, it adds little support and the gate will still sag.
Do I need planning permission to replace a wooden gate?
Not usually, if the new gate is a similar size to the old one. In England, gates over 1 metre next to a road used by vehicles, or over 2 metres elsewhere, generally need permission. Listed buildings and some conservation areas have extra controls.
Helpful guides
Replacing a Rotten Gate Post: Methods, Materials and Costs
A rotten gate post is replaced by removing the gate, digging out the old post and its concrete, setting a new treated softwood, hardwood or…
Read the guide →Repair or Replace a Wooden Gate? How to Decide
Repair a wooden gate if the frame is mostly sound and the problem is sagging, loose fittings, a few rotten boards or a rotten post. Replace…
Read the guide →Get a free wooden gate repair quote in Walsall
Tell us what you need and we'll come back with a clear price.
Request a quote