Kent · South East
Wooden Gate Repair in Whitstable
Rotten gate posts are one of the most common problems we see in Whitstable. Our specialists across Kent replace them properly so the fix lasts.
Send photos of your gate for a quick Whitstable repair price.
Whitstable and the surrounding area
We cover all of Whitstable and the wider Kent area. That includes the CT5 postcode districts. The same team covers Greenhill, Herne, Rough Common and Blean too.
Working in Whitstable
Commuter towns across the South East mix older town-centre terraces with large newer estates, and driveways are more common than in London. On older houses in Whitstable, matching the original board profile and ironmongery keeps the frontage in keeping with the street. Exposed coastal gardens in Whitstable put heavy wind load on solid gates, which need sturdier posts and well-braced frames.
Suburban front gardens in Whitstable often have low picket or ledged gates that just need new hinges, a brace and a fresh coat of stain. Many semi-detached and detached homes in Whitstable have tall boarded side gates that sag after a few years, usually because the post has moved.
Our services in Whitstable
Sagging Gate Rehanging
Lifting and squaring dropped gates, fixing loose joints, adding diagonal bracing and refitting hinges so the gate swings clear and latches first time.
Made-to-Measure Replacement Gates
When a gate is beyond saving, a new timber gate built or supplied to fit the opening exactly, hung on new posts and fittings.
Gate Restoration and Refinishing
Cleaning, sanding and re-treating weathered timber gates with preservative, oil, stain or paint to bring the colour back and protect the wood.
Hinge, Latch and Lock Replacement
Fitting new hinges, latches, bolts, drop bolts and gate locks, choosing heavy-duty, galvanised or stainless fittings to suit the gate and exposure.
Rail and Board Repairs
Replacing split boards, rotten bottom rails and broken stiles, matching timber where possible so the repair blends in with the original gate.
Gate Post Replacement
Removing rotten or leaning timber posts and setting new treated softwood, hardwood or steel-reinforced posts in concrete or post supports.
Guide prices for Whitstable
- New made-to-measure softwood side gate fitted: from £350. Treated ledged and braced or framed gate with fittings; hardwood driveway gates cost considerably more.
- Clean, sand and refinish a gate: £120–£300. Two coats of stain, oil or paint; double driveway gates sit at the top of the range.
- Replace rotten bottom rail or boards: £120–£280. Cutting out damaged timber, fitting matching sections and treating new wood on a typical side gate.
Prices are a guide. Your quote for Whitstable is a fixed price based on the details you give us. Full price guide.
Wooden Gate Repair questions from Whitstable
Is my old gate in Whitstable worth repairing?
If the frame is mostly sound, repair is usually much cheaper than a new gate. A carpenter in Whitstable will check the posts, joints and boards and tell you honestly which option is better value.
Do your carpenters cover villages near Whitstable?
Yes. Our network covers Whitstable and nearby places including Herne Bay and Canterbury. Enter your postcode on the quote form and we will match you with someone who works locally.
Do you replace rotten gate posts in Whitstable?
Yes. Specialists across Kent dig out rotten posts and old concrete, set new treated or hardwood posts in fresh concrete, then rehang the gate once it has firmed up.
Can someone fix my sagging gate in Whitstable this week?
Often, yes. Carpenters covering Whitstable and Herne Bay handle many small gate repairs at short notice, as they rarely need specially ordered parts. Post replacements may need an extra day for concrete to set.
Which way should the brace go on a wooden gate?
The diagonal brace should run from the bottom corner on the hinge side up to the top corner on the latch side. That way it pushes against the bottom hinge and resists the gate dropping. Fitted the other way, it adds little support and the gate will still sag.
How long does a wooden gate repair take?
Most repairs such as rehanging, new fittings or board replacement take two to four hours. Replacing a post usually takes half a day, with the gate rehung the next day once concrete has set. Refinishing often needs two short visits to allow drying time between coats.
Helpful guides
Replacing a Rotten Gate Post: Methods, Materials and Costs
A rotten gate post is replaced by removing the gate, digging out the old post and its concrete, setting a new treated softwood, hardwood or…
Read the guide →How to Fix a Sagging Wooden Gate (and Stop It Dropping Again)
To fix a sagging wooden gate, first find the cause: loose hinge screws, a weak or missing diagonal brace, loose joints or a leaning post.…
Read the guide →Get a free wooden gate repair quote in Whitstable
Tell us what you need and we'll come back with a clear price.
Request a quote