Redcar and Cleveland · North East
Wooden Gate Repair in Redcar
Before you pay for a new gate in Redcar, let a local carpenter check whether yours can be saved. Many can, for a fraction of the cost.
Where we work around Redcar
Redcar is in the Redcar and Cleveland council area in the North East. Postcodes we cover here include TS10 and TS11. The same team covers Marske-by-the-Sea, Grangetown, Saltburn-by-the-Sea and New Marske too.
Wooden Gate Repair in Redcar: local know-how
Many semi-detached and detached homes in Redcar have tall boarded side gates that sag after a few years, usually because the post has moved. Where Redcar gardens are well planted, specialists take care to protect borders when digging out old posts and concrete.
The North East has a high share of terraced and colliery-era housing, with modern estates growing around its larger towns. On older houses in Redcar, matching the original board profile and ironmongery keeps the frontage in keeping with the street. Holiday lets around Redcar need gates that stay secure and look smart between changeovers, so many owners book an annual check and re-oil.
What we can do in Redcar
Hinge, Latch and Lock Replacement
Fitting new hinges, latches, bolts, drop bolts and gate locks, choosing heavy-duty, galvanised or stainless fittings to suit the gate and exposure.
Rail and Board Repairs
Replacing split boards, rotten bottom rails and broken stiles, matching timber where possible so the repair blends in with the original gate.
Gate Post Replacement
Removing rotten or leaning timber posts and setting new treated softwood, hardwood or steel-reinforced posts in concrete or post supports.
Sagging Gate Rehanging
Lifting and squaring dropped gates, fixing loose joints, adding diagonal bracing and refitting hinges so the gate swings clear and latches first time.
Made-to-Measure Replacement Gates
When a gate is beyond saving, a new timber gate built or supplied to fit the opening exactly, hung on new posts and fittings.
Gate Restoration and Refinishing
Cleaning, sanding and re-treating weathered timber gates with preservative, oil, stain or paint to bring the colour back and protect the wood.
Typical costs in Redcar
- New made-to-measure softwood side gate fitted: from £350. Treated ledged and braced or framed gate with fittings; hardwood driveway gates cost considerably more.
- Clean, sand and refinish a gate: £120–£300. Two coats of stain, oil or paint; double driveway gates sit at the top of the range.
- Replace rotten bottom rail or boards: £120–£280. Cutting out damaged timber, fitting matching sections and treating new wood on a typical side gate.
Prices are a guide. Your quote for Redcar is a fixed price based on the details you give us. Full price guide.
Wooden Gate Repair questions from Redcar
Can you make my gate in Redcar lockable?
Yes. Specialists covering Redcar fit padlockable bolts, lockable latches and key-operated gate locks. It is a simple upgrade that makes side access to your garden much more secure.
What timber do you use for gate repairs in Redcar?
Carpenters in Redcar usually use pressure-treated softwood rated for ground contact for posts and rails, and match hardwood such as oak or iroko when repairing hardwood gates.
Do you replace rotten gate posts in Redcar?
Yes. Specialists across Redcar and Cleveland dig out rotten posts and old concrete, set new treated or hardwood posts in fresh concrete, then rehang the gate once it has firmed up.
Can you repair a shared side gate in Redcar?
Yes. Shared gates between Redcar homes are repaired the same way, but it is best to agree the work and cost with your neighbour before booking, as both households usually share responsibility.
Which way should the brace go on a wooden gate?
The diagonal brace should run from the bottom corner on the hinge side up to the top corner on the latch side. That way it pushes against the bottom hinge and resists the gate dropping. Fitted the other way, it adds little support and the gate will still sag.
How long does a wooden gate repair take?
Most repairs such as rehanging, new fittings or board replacement take two to four hours. Replacing a post usually takes half a day, with the gate rehung the next day once concrete has set. Refinishing often needs two short visits to allow drying time between coats.
Helpful guides
Replacing a Rotten Gate Post: Methods, Materials and Costs
A rotten gate post is replaced by removing the gate, digging out the old post and its concrete, setting a new treated softwood, hardwood or…
Read the guide →Repair or Replace a Wooden Gate? How to Decide
Repair a wooden gate if the frame is mostly sound and the problem is sagging, loose fittings, a few rotten boards or a rotten post. Replace…
Read the guide →Get a free wooden gate repair quote in Redcar
Tell us what you need and we'll come back with a clear price.
Request a quote