Wooden Gate Repair

Perth and Kinross · Scotland

Wooden Gate Repair in Perth

Our network of carpenters serving the Scotland repairs timber gates on period homes, new builds and everything between, starting in Perth.

Send photos of your gate for a quick Perth repair price.

Free Wooden Gate Repair quote in Perth

No obligation. We only use your details to reply about this job.

Covering Perth and nearby

We cover all of Perth and the wider Perth and Kinross area. Jobs here are mostly in the PH1 and PH2 postcode areas. Nearby places we also cover include Scone, Bridge of Earn, Almondbank and Luncarty.

What to expect in Perth

Double timber drive gates on Perth homes need regular adjustment, and a drop bolt and ground keep help stop the pair twisting. Where Perth gardens are well planted, specialists take care to protect borders when digging out old posts and concrete.

Scotland's towns have a lot of sandstone and granite buildings, tenement flats and harled houses, with Scottish building standards rather than English Building Regulations applying. Victorian and Edwardian homes in Perth often have hardwood gates with mortise and tenon frames that are well worth repairing rather than replacing. Older stone-walled gardens in Perth often have gates hung on pins set in the wall, which can be reset rather than replaced with new posts.

Wooden Gate Repair prices in Perth

  • Clean, sand and refinish a gate: £120–£300. Two coats of stain, oil or paint; double driveway gates sit at the top of the range.
  • Replace rotten bottom rail or boards: £120–£280. Cutting out damaged timber, fitting matching sections and treating new wood on a typical side gate.
  • Replace hinges and latch: £80–£160. Supply and fit of galvanised or black hinges and a new latch or lockable bolt.

Prices are a guide. Your quote for Perth is a fixed price based on the details you give us. Full price guide.

Wooden Gate Repair questions from Perth

Do I need permission to replace a gate in Perth?

Usually not for a like-for-like replacement. Taller gates, listed buildings and some conservation areas may need consent from Perth and Kinross, so check before making major changes.

Can someone fix my sagging gate in Perth this week?

Often, yes. Carpenters covering Perth and Glenrothes handle many small gate repairs at short notice, as they rarely need specially ordered parts. Post replacements may need an extra day for concrete to set.

Is my old gate in Perth worth repairing?

If the frame is mostly sound, repair is usually much cheaper than a new gate. A carpenter in Perth will check the posts, joints and boards and tell you honestly which option is better value.

Do you restore hardwood gates in Perth?

Yes. Oak and iroko gates in Perth can be cleaned, sanded and re-oiled to bring the colour back, with any split rails or boards replaced in matching hardwood first.

Which way should the brace go on a wooden gate?

The diagonal brace should run from the bottom corner on the hinge side up to the top corner on the latch side. That way it pushes against the bottom hinge and resists the gate dropping. Fitted the other way, it adds little support and the gate will still sag.

Do I need planning permission to replace a wooden gate?

Not usually, if the new gate is a similar size to the old one. In England, gates over 1 metre next to a road used by vehicles, or over 2 metres elsewhere, generally need permission. Listed buildings and some conservation areas have extra controls.

Get a free wooden gate repair quote in Perth

Tell us what you need and we'll come back with a clear price.

Request a quote