Thurrock · Eastern
Wooden Gate Repair in Grays
We arrange wooden gate repairs in Grays, South Ockendon and Swanscombe, from new hinges and latches to full post replacement and refinishing.
Our Grays coverage
Grays is in the Thurrock council area in the East of England. Jobs here are mostly in the RM17, RM16, RM20 and RM18 postcode areas. The same team covers Northfleet, Ebbsfleet Valley, Chadwell St Mary, Aveley and Tilbury too.
Local considerations in Grays
Across the East of England you find older timber-framed and brick cottages in the villages and large modern estates around the expanding towns. Newer homes in Grays sometimes have gates fixed to the house wall, where specialists use proper wall anchors to stop the hinge side pulling away.
Suburban front gardens in Grays often have low picket or ledged gates that just need new hinges, a brace and a fresh coat of stain. Double timber drive gates on Grays homes need regular adjustment, and a drop bolt and ground keep help stop the pair twisting.
Wooden Gate Repair jobs we handle in Grays
Gate Restoration and Refinishing
Cleaning, sanding and re-treating weathered timber gates with preservative, oil, stain or paint to bring the colour back and protect the wood.
Hinge, Latch and Lock Replacement
Fitting new hinges, latches, bolts, drop bolts and gate locks, choosing heavy-duty, galvanised or stainless fittings to suit the gate and exposure.
Rail and Board Repairs
Replacing split boards, rotten bottom rails and broken stiles, matching timber where possible so the repair blends in with the original gate.
Gate Post Replacement
Removing rotten or leaning timber posts and setting new treated softwood, hardwood or steel-reinforced posts in concrete or post supports.
Sagging Gate Rehanging
Lifting and squaring dropped gates, fixing loose joints, adding diagonal bracing and refitting hinges so the gate swings clear and latches first time.
Made-to-Measure Replacement Gates
When a gate is beyond saving, a new timber gate built or supplied to fit the opening exactly, hung on new posts and fittings.
How much it costs in Grays
- New made-to-measure softwood side gate fitted: from £350. Treated ledged and braced or framed gate with fittings; hardwood driveway gates cost considerably more.
- Clean, sand and refinish a gate: £120–£300. Two coats of stain, oil or paint; double driveway gates sit at the top of the range.
- Replace rotten bottom rail or boards: £120–£280. Cutting out damaged timber, fitting matching sections and treating new wood on a typical side gate.
Prices are a guide. Your quote for Grays is a fixed price based on the details you give us. Full price guide.
Wooden Gate Repair questions from Grays
Do you restore hardwood gates in Grays?
Yes. Oak and iroko gates in Grays can be cleaned, sanded and re-oiled to bring the colour back, with any split rails or boards replaced in matching hardwood first.
How much does wooden gate repair cost in Grays?
Most gate repairs in Grays cost between £90 and £350, depending on whether the job is a simple rehang, new fittings or a replacement post. A local carpenter can usually price the work from your photos.
Do your carpenters cover villages near Grays?
Yes. Our network covers Grays and nearby places including South Ockendon and Swanscombe. Enter your postcode on the quote form and we will match you with someone who works locally.
Can you make my gate in Grays lockable?
Yes. Specialists covering Grays fit padlockable bolts, lockable latches and key-operated gate locks. It is a simple upgrade that makes side access to your garden much more secure.
Which way should the brace go on a wooden gate?
The diagonal brace should run from the bottom corner on the hinge side up to the top corner on the latch side. That way it pushes against the bottom hinge and resists the gate dropping. Fitted the other way, it adds little support and the gate will still sag.
Do I need planning permission to replace a wooden gate?
Not usually, if the new gate is a similar size to the old one. In England, gates over 1 metre next to a road used by vehicles, or over 2 metres elsewhere, generally need permission. Listed buildings and some conservation areas have extra controls.
Helpful guides
How to Fix a Sagging Wooden Gate (and Stop It Dropping Again)
To fix a sagging wooden gate, first find the cause: loose hinge screws, a weak or missing diagonal brace, loose joints or a leaning post.…
Read the guide →Repair or Replace a Wooden Gate? How to Decide
Repair a wooden gate if the frame is mostly sound and the problem is sagging, loose fittings, a few rotten boards or a rotten post. Replace…
Read the guide →Get a free wooden gate repair quote in Grays
Tell us what you need and we'll come back with a clear price.
Request a quote