Swansea · Wales
Wooden Gate Repair in Gorseinon
Need wooden gate repair in Gorseinon? We put homeowners across Swansea in touch with vetted local carpenters who fix sagging, rotten and sticking gates.
Gorseinon and the surrounding area
We cover all of Gorseinon and the wider Swansea area. Postcodes we cover here include SA4. The same team covers Pontarddulais, Penllergaer, Pen-clawdd, Waunarlwydd and Dunvant too.
Working in Gorseinon
Terraces climbing steep valley sides are common in South Wales, while North and West Wales have more rural, stone-built properties. Victorian and Edwardian homes in Gorseinon often have hardwood gates with mortise and tenon frames that are well worth repairing rather than replacing. High rainfall in parts of Wales shortens the life of timber, so specialists working around Gorseinon pay extra attention to drainage at the post base.
Rural properties near Gorseinon with long drives often have wide timber gates that need stronger bracing and posts set deeper in soft ground. Field and five-bar gates around Gorseinon often hang on heavy hardwood posts, which specialists can replace and rehang with traditional hook and band hinges.
Our services in Gorseinon
Hinge, Latch and Lock Replacement
Fitting new hinges, latches, bolts, drop bolts and gate locks, choosing heavy-duty, galvanised or stainless fittings to suit the gate and exposure.
Rail and Board Repairs
Replacing split boards, rotten bottom rails and broken stiles, matching timber where possible so the repair blends in with the original gate.
Gate Post Replacement
Removing rotten or leaning timber posts and setting new treated softwood, hardwood or steel-reinforced posts in concrete or post supports.
Sagging Gate Rehanging
Lifting and squaring dropped gates, fixing loose joints, adding diagonal bracing and refitting hinges so the gate swings clear and latches first time.
Made-to-Measure Replacement Gates
When a gate is beyond saving, a new timber gate built or supplied to fit the opening exactly, hung on new posts and fittings.
Gate Restoration and Refinishing
Cleaning, sanding and re-treating weathered timber gates with preservative, oil, stain or paint to bring the colour back and protect the wood.
Guide prices for Gorseinon
- Clean, sand and refinish a gate: £120–£300. Two coats of stain, oil or paint; double driveway gates sit at the top of the range.
- Replace rotten bottom rail or boards: £120–£280. Cutting out damaged timber, fitting matching sections and treating new wood on a typical side gate.
- Replace hinges and latch: £80–£160. Supply and fit of galvanised or black hinges and a new latch or lockable bolt.
Prices are a guide. Your quote for Gorseinon is a fixed price based on the details you give us. Full price guide.
Wooden Gate Repair questions from Gorseinon
Do you replace rotten gate posts in Gorseinon?
Yes. Specialists across Swansea dig out rotten posts and old concrete, set new treated or hardwood posts in fresh concrete, then rehang the gate once it has firmed up.
Can someone fix my sagging gate in Gorseinon this week?
Often, yes. Carpenters covering Gorseinon and Llanelli handle many small gate repairs at short notice, as they rarely need specially ordered parts. Post replacements may need an extra day for concrete to set.
How much does wooden gate repair cost in Gorseinon?
Most gate repairs in Gorseinon cost between £90 and £350, depending on whether the job is a simple rehang, new fittings or a replacement post. A local carpenter can usually price the work from your photos.
What timber do you use for gate repairs in Gorseinon?
Carpenters in Gorseinon usually use pressure-treated softwood rated for ground contact for posts and rails, and match hardwood such as oak or iroko when repairing hardwood gates.
How long does a wooden gate repair take?
Most repairs such as rehanging, new fittings or board replacement take two to four hours. Replacing a post usually takes half a day, with the gate rehung the next day once concrete has set. Refinishing often needs two short visits to allow drying time between coats.
Which way should the brace go on a wooden gate?
The diagonal brace should run from the bottom corner on the hinge side up to the top corner on the latch side. That way it pushes against the bottom hinge and resists the gate dropping. Fitted the other way, it adds little support and the gate will still sag.
Helpful guides
Replacing a Rotten Gate Post: Methods, Materials and Costs
A rotten gate post is replaced by removing the gate, digging out the old post and its concrete, setting a new treated softwood, hardwood or…
Read the guide →Repair or Replace a Wooden Gate? How to Decide
Repair a wooden gate if the frame is mostly sound and the problem is sagging, loose fittings, a few rotten boards or a rotten post. Replace…
Read the guide →Get a free wooden gate repair quote in Gorseinon
Tell us what you need and we'll come back with a clear price.
Request a quote