Hampshire · South East
Wooden Gate Repair in Fareham
Need wooden gate repair in Fareham? We put homeowners across Hampshire in touch with vetted local carpenters who fix sagging, rotten and sticking gates.
Where we work around Fareham
We cover all of Fareham and the wider Hampshire area. Jobs here are mostly in the PO16, PO14, PO15, SO31, PO17 and PO13 postcode areas. The same team covers Gosport, Stubbington, Locks Heath, Warsash and Whiteley too.
Wooden Gate Repair in Fareham: local know-how
The South East has a large share of 1930s semi-detached housing and post-war estates, with plenty of new-build development around its larger towns. Newer homes in Fareham sometimes have gates fixed to the house wall, where specialists use proper wall anchors to stop the hinge side pulling away. Salt air near Fareham corrodes cheap fittings quickly, so specialists use stainless or hot-dip galvanised hinges and screws on coastal gates.
Suburban front gardens in Fareham often have low picket or ledged gates that just need new hinges, a brace and a fresh coat of stain. Many semi-detached and detached homes in Fareham have tall boarded side gates that sag after a few years, usually because the post has moved.
What we can do in Fareham
Gate Post Replacement
Removing rotten or leaning timber posts and setting new treated softwood, hardwood or steel-reinforced posts in concrete or post supports.
Sagging Gate Rehanging
Lifting and squaring dropped gates, fixing loose joints, adding diagonal bracing and refitting hinges so the gate swings clear and latches first time.
Made-to-Measure Replacement Gates
When a gate is beyond saving, a new timber gate built or supplied to fit the opening exactly, hung on new posts and fittings.
Gate Restoration and Refinishing
Cleaning, sanding and re-treating weathered timber gates with preservative, oil, stain or paint to bring the colour back and protect the wood.
Hinge, Latch and Lock Replacement
Fitting new hinges, latches, bolts, drop bolts and gate locks, choosing heavy-duty, galvanised or stainless fittings to suit the gate and exposure.
Rail and Board Repairs
Replacing split boards, rotten bottom rails and broken stiles, matching timber where possible so the repair blends in with the original gate.
Typical costs in Fareham
- Replace hinges and latch: £80–£160. Supply and fit of galvanised or black hinges and a new latch or lockable bolt.
- Replace a timber gate post: £180–£350. Per post, including removing the old post and concrete, a new treated post and fresh concrete.
- Rehang and brace a sagging side gate: £90–£180. Tightening joints, adding a diagonal brace and refixing hinges into sound timber on a standard garden gate.
Prices are a guide. Your quote for Fareham is a fixed price based on the details you give us. Full price guide.
Wooden Gate Repair questions from Fareham
How much does wooden gate repair cost in Fareham?
Most gate repairs in Fareham cost between £90 and £350, depending on whether the job is a simple rehang, new fittings or a replacement post. A local carpenter can usually price the work from your photos.
Do you restore hardwood gates in Fareham?
Yes. Oak and iroko gates in Fareham can be cleaned, sanded and re-oiled to bring the colour back, with any split rails or boards replaced in matching hardwood first.
Is my old gate in Fareham worth repairing?
If the frame is mostly sound, repair is usually much cheaper than a new gate. A carpenter in Fareham will check the posts, joints and boards and tell you honestly which option is better value.
Can someone fix my sagging gate in Fareham this week?
Often, yes. Carpenters covering Fareham and Lee-on-the-Solent handle many small gate repairs at short notice, as they rarely need specially ordered parts. Post replacements may need an extra day for concrete to set.
Do I need planning permission to replace a wooden gate?
Not usually, if the new gate is a similar size to the old one. In England, gates over 1 metre next to a road used by vehicles, or over 2 metres elsewhere, generally need permission. Listed buildings and some conservation areas have extra controls.
Which way should the brace go on a wooden gate?
The diagonal brace should run from the bottom corner on the hinge side up to the top corner on the latch side. That way it pushes against the bottom hinge and resists the gate dropping. Fitted the other way, it adds little support and the gate will still sag.
Helpful guides
Replacing a Rotten Gate Post: Methods, Materials and Costs
A rotten gate post is replaced by removing the gate, digging out the old post and its concrete, setting a new treated softwood, hardwood or…
Read the guide →How to Fix a Sagging Wooden Gate (and Stop It Dropping Again)
To fix a sagging wooden gate, first find the cause: loose hinge screws, a weak or missing diagonal brace, loose joints or a leaning post.…
Read the guide →Get a free wooden gate repair quote in Fareham
Tell us what you need and we'll come back with a clear price.
Request a quote