East Sussex · South East
Wooden Gate Repair in Crowborough
Gates in Crowborough and nearby Uckfield take a battering from wet winters. Our local carpenters replace rotten posts and broken rails so they swing true again.
Request a wooden gate repair quote for your Crowborough home.
Covering Crowborough and nearby
Crowborough is in the East Sussex council area in the South East. That includes the TN6 postcode districts.
What to expect in Crowborough
Damp, shaded spots on country properties outside Crowborough speed up rot, so specialists recommend hardwood posts or concrete spurs. Livestock and dogs mean gates on smallholdings around Crowborough must latch reliably, so self-closing hinges and spring latches are popular upgrades.
Commuter towns across the South East mix older town-centre terraces with large newer estates, and driveways are more common than in London. On post-2000 estates around Crowborough, side gates are commonly hung on thin posts that loosen within a few years and need replacing with stronger ones.
Wooden Gate Repair services in Crowborough
Rail and Board Repairs
Replacing split boards, rotten bottom rails and broken stiles, matching timber where possible so the repair blends in with the original gate.
Gate Post Replacement
Removing rotten or leaning timber posts and setting new treated softwood, hardwood or steel-reinforced posts in concrete or post supports.
Sagging Gate Rehanging
Lifting and squaring dropped gates, fixing loose joints, adding diagonal bracing and refitting hinges so the gate swings clear and latches first time.
Made-to-Measure Replacement Gates
When a gate is beyond saving, a new timber gate built or supplied to fit the opening exactly, hung on new posts and fittings.
Gate Restoration and Refinishing
Cleaning, sanding and re-treating weathered timber gates with preservative, oil, stain or paint to bring the colour back and protect the wood.
Hinge, Latch and Lock Replacement
Fitting new hinges, latches, bolts, drop bolts and gate locks, choosing heavy-duty, galvanised or stainless fittings to suit the gate and exposure.
Wooden Gate Repair prices in Crowborough
- Clean, sand and refinish a gate: £120–£300. Two coats of stain, oil or paint; double driveway gates sit at the top of the range.
- Replace rotten bottom rail or boards: £120–£280. Cutting out damaged timber, fitting matching sections and treating new wood on a typical side gate.
- Replace hinges and latch: £80–£160. Supply and fit of galvanised or black hinges and a new latch or lockable bolt.
Prices are a guide. Your quote for Crowborough is a fixed price based on the details you give us. Full price guide.
Wooden Gate Repair questions from Crowborough
Do you replace rotten gate posts in Crowborough?
Yes. Specialists across East Sussex dig out rotten posts and old concrete, set new treated or hardwood posts in fresh concrete, then rehang the gate once it has firmed up.
Can someone fix my sagging gate in Crowborough this week?
Often, yes. Carpenters covering Crowborough and Uckfield handle many small gate repairs at short notice, as they rarely need specially ordered parts. Post replacements may need an extra day for concrete to set.
How much does wooden gate repair cost in Crowborough?
Most gate repairs in Crowborough cost between £90 and £350, depending on whether the job is a simple rehang, new fittings or a replacement post. A local carpenter can usually price the work from your photos.
What timber do you use for gate repairs in Crowborough?
Carpenters in Crowborough usually use pressure-treated softwood rated for ground contact for posts and rails, and match hardwood such as oak or iroko when repairing hardwood gates.
Why is my wooden gate sagging?
Usually because the hinge screws are pulling out, the frame joints have loosened, or the hanging post is leaning or rotten. A missing or wrongly fitted diagonal brace makes it worse. The fix depends on the cause, so check the post first by pushing it; if it moves, the post needs attention before the gate.
How long does a wooden gate repair take?
Most repairs such as rehanging, new fittings or board replacement take two to four hours. Replacing a post usually takes half a day, with the gate rehung the next day once concrete has set. Refinishing often needs two short visits to allow drying time between coats.
Helpful guides
How to Fix a Sagging Wooden Gate (and Stop It Dropping Again)
To fix a sagging wooden gate, first find the cause: loose hinge screws, a weak or missing diagonal brace, loose joints or a leaning post.…
Read the guide →Replacing a Rotten Gate Post: Methods, Materials and Costs
A rotten gate post is replaced by removing the gate, digging out the old post and its concrete, setting a new treated softwood, hardwood or…
Read the guide →Get a free wooden gate repair quote in Crowborough
Tell us what you need and we'll come back with a clear price.
Request a quote