Somerset · South West
Wooden Gate Repair in Burnham-on-Sea
Need wooden gate repair in Burnham-on-Sea? We put homeowners across Somerset in touch with vetted local carpenters who fix sagging, rotten and sticking gates.
Where we work around Burnham-on-Sea
Burnham-on-Sea is in the Somerset council area in the South West. That includes the TA8 and TA9 postcode districts. The same team covers Brent Knoll, Berrow, Huntspill, Alstone and Pawlett too.
Wooden Gate Repair in Burnham-on-Sea: local know-how
Local stone, cob and lime-rendered buildings are common in parts of the South West, so materials need to suit older, breathable construction. On post-2000 estates around Burnham-on-Sea, side gates are commonly hung on thin posts that loosen within a few years and need replacing with stronger ones. Salt air near Burnham-on-Sea corrodes cheap fittings quickly, so specialists use stainless or hot-dip galvanised hinges and screws on coastal gates.
Rural properties near Burnham-on-Sea with long drives often have wide timber gates that need stronger bracing and posts set deeper in soft ground. Field and five-bar gates around Burnham-on-Sea often hang on heavy hardwood posts, which specialists can replace and rehang with traditional hook and band hinges.
What we can do in Burnham-on-Sea
Hinge, Latch and Lock Replacement
Fitting new hinges, latches, bolts, drop bolts and gate locks, choosing heavy-duty, galvanised or stainless fittings to suit the gate and exposure.
Rail and Board Repairs
Replacing split boards, rotten bottom rails and broken stiles, matching timber where possible so the repair blends in with the original gate.
Gate Post Replacement
Removing rotten or leaning timber posts and setting new treated softwood, hardwood or steel-reinforced posts in concrete or post supports.
Sagging Gate Rehanging
Lifting and squaring dropped gates, fixing loose joints, adding diagonal bracing and refitting hinges so the gate swings clear and latches first time.
Made-to-Measure Replacement Gates
When a gate is beyond saving, a new timber gate built or supplied to fit the opening exactly, hung on new posts and fittings.
Gate Restoration and Refinishing
Cleaning, sanding and re-treating weathered timber gates with preservative, oil, stain or paint to bring the colour back and protect the wood.
Typical costs in Burnham-on-Sea
- New made-to-measure softwood side gate fitted: from £350. Treated ledged and braced or framed gate with fittings; hardwood driveway gates cost considerably more.
- Clean, sand and refinish a gate: £120–£300. Two coats of stain, oil or paint; double driveway gates sit at the top of the range.
- Replace rotten bottom rail or boards: £120–£280. Cutting out damaged timber, fitting matching sections and treating new wood on a typical side gate.
Prices are a guide. Your quote for Burnham-on-Sea is a fixed price based on the details you give us. Full price guide.
Wooden Gate Repair questions from Burnham-on-Sea
Do I need permission to replace a gate in Burnham-on-Sea?
Usually not for a like-for-like replacement. Taller gates, listed buildings and some conservation areas may need consent from Somerset, so check before making major changes.
Can you repair a shared side gate in Burnham-on-Sea?
Yes. Shared gates between Burnham-on-Sea homes are repaired the same way, but it is best to agree the work and cost with your neighbour before booking, as both households usually share responsibility.
Do you replace rotten gate posts in Burnham-on-Sea?
Yes. Specialists across Somerset dig out rotten posts and old concrete, set new treated or hardwood posts in fresh concrete, then rehang the gate once it has firmed up.
What timber do you use for gate repairs in Burnham-on-Sea?
Carpenters in Burnham-on-Sea usually use pressure-treated softwood rated for ground contact for posts and rails, and match hardwood such as oak or iroko when repairing hardwood gates.
Which way should the brace go on a wooden gate?
The diagonal brace should run from the bottom corner on the hinge side up to the top corner on the latch side. That way it pushes against the bottom hinge and resists the gate dropping. Fitted the other way, it adds little support and the gate will still sag.
How do I stop a gate post from rotting?
Use posts rated for ground contact, set them in concrete shaped to slope away from the timber, and keep soil and mulch clear of the base. Metal post supports or concrete spurs keep timber off the ground entirely. Re-treating the exposed timber every few years also helps.
Helpful guides
Repair or Replace a Wooden Gate? How to Decide
Repair a wooden gate if the frame is mostly sound and the problem is sagging, loose fittings, a few rotten boards or a rotten post. Replace…
Read the guide →How to Treat and Refinish a Wooden Gate: Oil, Stain or Paint?
Choose oil for hardwood gates you want to keep looking natural, stain or a coloured preservative for softwood gates, and exterior paint for…
Read the guide →Get a free wooden gate repair quote in Burnham-on-Sea
Tell us what you need and we'll come back with a clear price.
Request a quote