Buckinghamshire · South East
Wooden Gate Repair in Beaconsfield
From cottage garden gates to wide timber drive gates, our specialists repair and rehang wooden gates throughout Beaconsfield and the the South East.
Beaconsfield and the surrounding area
We cover all of Beaconsfield and the wider Buckinghamshire area. That includes the HP9 postcode districts. We also take jobs in Chalfont St Peter, Hazlemere, Flackwell Heath, Bourne End and Chalfont St Giles.
Working in Beaconsfield
Commuter towns across the South East mix older town-centre terraces with large newer estates, and driveways are more common than in London. Period properties in Beaconsfield may have gates hung on brick piers, where loose hinge pins need resetting in mortar rather than replacing posts.
Damp, shaded spots on country properties outside Beaconsfield speed up rot, so specialists recommend hardwood posts or concrete spurs. Rural properties near Beaconsfield with long drives often have wide timber gates that need stronger bracing and posts set deeper in soft ground.
Our services in Beaconsfield
Hinge, Latch and Lock Replacement
Fitting new hinges, latches, bolts, drop bolts and gate locks, choosing heavy-duty, galvanised or stainless fittings to suit the gate and exposure.
Rail and Board Repairs
Replacing split boards, rotten bottom rails and broken stiles, matching timber where possible so the repair blends in with the original gate.
Gate Post Replacement
Removing rotten or leaning timber posts and setting new treated softwood, hardwood or steel-reinforced posts in concrete or post supports.
Sagging Gate Rehanging
Lifting and squaring dropped gates, fixing loose joints, adding diagonal bracing and refitting hinges so the gate swings clear and latches first time.
Made-to-Measure Replacement Gates
When a gate is beyond saving, a new timber gate built or supplied to fit the opening exactly, hung on new posts and fittings.
Gate Restoration and Refinishing
Cleaning, sanding and re-treating weathered timber gates with preservative, oil, stain or paint to bring the colour back and protect the wood.
Guide prices for Beaconsfield
- Clean, sand and refinish a gate: £120–£300. Two coats of stain, oil or paint; double driveway gates sit at the top of the range.
- Replace rotten bottom rail or boards: £120–£280. Cutting out damaged timber, fitting matching sections and treating new wood on a typical side gate.
- Replace hinges and latch: £80–£160. Supply and fit of galvanised or black hinges and a new latch or lockable bolt.
Prices are a guide. Your quote for Beaconsfield is a fixed price based on the details you give us. Full price guide.
Wooden Gate Repair questions from Beaconsfield
Do I need permission to replace a gate in Beaconsfield?
Usually not for a like-for-like replacement. Taller gates, listed buildings and some conservation areas may need consent from Buckinghamshire, so check before making major changes.
Can you repair a shared side gate in Beaconsfield?
Yes. Shared gates between Beaconsfield homes are repaired the same way, but it is best to agree the work and cost with your neighbour before booking, as both households usually share responsibility.
Do you replace rotten gate posts in Beaconsfield?
Yes. Specialists across Buckinghamshire dig out rotten posts and old concrete, set new treated or hardwood posts in fresh concrete, then rehang the gate once it has firmed up.
What timber do you use for gate repairs in Beaconsfield?
Carpenters in Beaconsfield usually use pressure-treated softwood rated for ground contact for posts and rails, and match hardwood such as oak or iroko when repairing hardwood gates.
Why won't my gate latch properly?
Usually because the gate has dropped, the post has moved or the timber has swollen in wet weather. Moving the latch keep is a quick fix, but if the gate is sagging the specialist will rehang it so the latch lines up through the seasons.
Which way should the brace go on a wooden gate?
The diagonal brace should run from the bottom corner on the hinge side up to the top corner on the latch side. That way it pushes against the bottom hinge and resists the gate dropping. Fitted the other way, it adds little support and the gate will still sag.
Helpful guides
How to Fix a Sagging Wooden Gate (and Stop It Dropping Again)
To fix a sagging wooden gate, first find the cause: loose hinge screws, a weak or missing diagonal brace, loose joints or a leaning post.…
Read the guide →How to Treat and Refinish a Wooden Gate: Oil, Stain or Paint?
Choose oil for hardwood gates you want to keep looking natural, stain or a coloured preservative for softwood gates, and exterior paint for…
Read the guide →Get a free wooden gate repair quote in Beaconsfield
Tell us what you need and we'll come back with a clear price.
Request a quote